The Bell 206 is a two-bladed, single- or twin-engine helicopter, manufactured by Bell Helicopter. Bell successfully marketed the aircraft commercially as the five-place Bell 206A JetRanger. This design was eventually selected by the Army as the OH-58 Kiowa. Bell also developed a seven-place LongRanger, which was later offered with a twin-engine option as the TwinRanger.

Initially the rotors are stationary, use the B key or triggger setting 2 to start or stop the rotors. The helicopter will lift and hover above the track, using the H key or trigger setting 1 – use the H key again to lower the helicopter. The maximum hover height is 15 metres, and may be varied in the config file, default setting 10 metres.

The helicopter will load passengers the V key opens the rear passenger doors manually if required. The model has night lights and an interior. It does not have operating levers or controls.

Models available include the Australian aircraft and a Westpac Rescue version. Two flying models and four static versions are available for the American Air Evac medical service, in two paint schemes.

The Aircraft Action Trigger, kuid:76656:24050 when placed on track and set to the correct number will operate the following:

• initially the rotors are stationary, use the B key or triggger setting 2 to start or stop the rotors;
• the helicopter will lift and hover above the track, using the H key or trigger setting 1 – use the H key again to lower the helicopter;
• maximum hover height is 15 metres, variable in the string table, default setting is 10 metres;
• the V key (or trigger number 3 setting) will operate the rear passenger doors;
• the Rescue helicopter has a winch fitted, trigger setting number 5 lowers or raises the winch.

The helicopter is in the colours of the Rega Rescue of Switzerland. This model has new animation functions, allowing it to fly like a helicopter without the need of a vertical lift table.

When initially placed, the rotors are stationary. Use the B key to start up the engines. Give a little engine power and press the H key – the helicopter will travel forward and lift 15 metres into the air. When landing, use the H key to float down and the B key to stop engines on touch down.

The side door operates on the V key and the winch operates on trigger setting 5.

A flyable helicopter, a variant of the Eurocopter EC-145. This model will load passengers at passenger enabled stations, such as the Heliport models.

Like the EC-145, it also has startup functions and hover ability. See above.

The side door operates on the V key and the winch operates on trigger setting 5.

A flyable helicopter, with a working interior. This model will load passengers at passenger enabled stations, such as the Heliport models.

Refer to the Oil Tankers and Rigs Project page for details on all helicopters.

A flyable helicopter, with a working interior. This model will load passengers at passenger enabled stations, such as the Heliport models. refer to the Oil Tankers and Rigs Project page for details.

It drives in DCC or Cab mode and loads and unloads passengers, with operating doors

A medical version of the Eurocopter model, with a passenger in stretcher care.